Snowblower petrol ST 2200
Engine 4-stroke OHV
Power 6.5 Le
Working width: 55 cm
Spreading distance: 10-15 m
Drive: 5 forward/2 reverse
Adjustable ejector tube:: 190 degrees
Auger/turbine wheel diameter: 30 cm/25 cm
Wheels 4.10-6 NHS
Warranty 1 year
Milling capacity up to 1.700 m³/h.
Állítható kidobócső.
1,700 m/min.
Differential lock with on/off switch on both sides.
Ad...
Long description
Shipping
block
Megszűnt termék, többé már nem lesz kapható
Engine 4-stroke OHV
Power 6.5 Le
Working width: 55 cm
Spreading distance: 10-15 m
Drive: 5 forward/2 reverse
Adjustable ejector tube:: 190 degrees
Auger/turbine wheel diameter: 30 cm/25 cm
Wheels 4.10-6 NHS
Warranty 1 year
Milling capacity up to 1.700 m³/h.
Állítható kidobócső.
1,700 m/min.
Differential lock with on/off switch on both sides.
Adjustable sliding foot for correct height adjustment.
Angled ejector pipe - prevents snow from entering.
Serrated milling auger protected by a break pin.
2-speed milling unit.
Separately switchable milling unit and drive.
3-piece turbine wheel.
Snow chain is an optional accessory.
2-speed milling unit:
Stage 1: A slowly rotating milling auger picks up the snow and transports it to the discharge chute.
Stage 2: Blows the snow out through the ejector pipe in the set direction. The ejector tube is adjustable through 190°. Important for safe operation: the milling unit and the drive can be switched separately, both milling pulleys are protected by a safety pin.
Power 6.5 Le
Working width: 55 cm
Spreading distance: 10-15 m
Drive: 5 forward/2 reverse
Adjustable ejector tube:: 190 degrees
Auger/turbine wheel diameter: 30 cm/25 cm
Wheels 4.10-6 NHS
Warranty 1 year
Milling capacity up to 1.700 m³/h.
Állítható kidobócső.
1,700 m/min.
Differential lock with on/off switch on both sides.
Adjustable sliding foot for correct height adjustment.
Angled ejector pipe - prevents snow from entering.
Serrated milling auger protected by a break pin.
2-speed milling unit.
Separately switchable milling unit and drive.
3-piece turbine wheel.
Snow chain is an optional accessory.
2-speed milling unit:
Stage 1: A slowly rotating milling auger picks up the snow and transports it to the discharge chute.
Stage 2: Blows the snow out through the ejector pipe in the set direction. The ejector tube is adjustable through 190°. Important for safe operation: the milling unit and the drive can be switched separately, both milling pulleys are protected by a safety pin.
| Weight: | 80 kg |
|---|---|
| Length: | 1300 mm |
| Aviability: | 1-4 nap |
| Basic sales unit: | db |
Login
Login or registration with a social account
Login
Login or registration with a social account