Cascademax 18000 18000l/h
Ideal for running streams and waterfalls. Cascademax pumps are characterised by very low energy consumption. The pump filter does not form foam during operation. Special features of UBBINK Cascademax® pumps: the "no sponge required" (NSS) system for low maintenance. The NSS "NSS" (NSS "NSS") is equipped with a thermal protection system (TPS) ag...
Long description
Shipping
block
Megszűnt termék, többé már nem lesz kapható
Ideal for running streams and waterfalls. Cascademax pumps are characterised by very low energy consumption. The pump filter does not form foam during operation. Special features of UBBINK Cascademax® pumps: the "no sponge required" (NSS) system for low maintenance. The NSS "NSS" (NSS "NSS") is equipped with a thermal protection system (TPS) against overheating. Ceramic shaft with bearing tip (CST) system, to ensure increased power output. Asynchronous, high-performance, silent motor (AMS). Durable, powerful, high-capacity pump capable of lifting large quantities of water. Capable of pumping contaminated water up to 8mm thick (max. 8mm thick dirt). The CasscadeMax® 18.000 pump is best suited for operating water scenes of the following heights and widths: 1.Height: 200 cm, corresponding width: 50 cm. 2.Height: 150 cm, corresponding width: 75 cm. 3.Height: 100 cm, corresponding width: 100 cm."
Pump characteristics
Maximum water volume (Q max) 18000 l/h
Maximum lift height (H max) 6 m
18.5 m Max. pressure head 18.5 m Max. pressure head diameter 1,1/2"
Power consumption 250 watts
Cable length 10 meters
Installation and operation
Water temperature 4-35 c°
Installation depth 0.2-1 Meter
Installation On a flat surface, below water level (dry running prohibited)
Maintenance and winterization
Easy maintenance thanks to its simple design. Depending on the type of use, it is sufficient to rinse the pre-filter casing and the pump with clean water. In case of winterisation, store in a bucket of water in a frost-free place after cleaning.
Kit contents
Pump, universal connector.
Other Features
Asynchronous motor epoxy resin embedded constant rotation pressure filter and high flow waterfall feeding pump with heat protection.
Quality reinforced robust magnet rotor and impeller insensitive to small particle size contaminants.
High wear (Long Working Life) ceramic shaft for continuous operation and low consumption.
Quick-locking sponge-free pre-filter system and adjustable levelling feet.
Pump characteristics
Maximum water volume (Q max) 18000 l/h
Maximum lift height (H max) 6 m
18.5 m Max. pressure head 18.5 m Max. pressure head diameter 1,1/2"
Power consumption 250 watts
Cable length 10 meters
Installation and operation
Water temperature 4-35 c°
Installation depth 0.2-1 Meter
Installation On a flat surface, below water level (dry running prohibited)
Maintenance and winterization
Easy maintenance thanks to its simple design. Depending on the type of use, it is sufficient to rinse the pre-filter casing and the pump with clean water. In case of winterisation, store in a bucket of water in a frost-free place after cleaning.
Kit contents
Pump, universal connector.
Other Features
Asynchronous motor epoxy resin embedded constant rotation pressure filter and high flow waterfall feeding pump with heat protection.
Quality reinforced robust magnet rotor and impeller insensitive to small particle size contaminants.
High wear (Long Working Life) ceramic shaft for continuous operation and low consumption.
Quick-locking sponge-free pre-filter system and adjustable levelling feet.
Aviability: | 1-4 nap |
---|---|
Basic sales unit: | db |
Culture: | Díszkert |
Login
Login or registration with a social account
Login
Login or registration with a social account