Cascademax 15000 15000l/h

Ideal for running streams and waterfalls. Cascademax pumps are characterised by very low energy consumption. The pump filter does not form foam during operation. Special features of UBBINK Cascademax® pumps: 'No sponge required' system (NSS) for low maintenance. NSS "NSS" (NSS "NSS"), which requires no need for a NSS "NSS" system. TPS (TPS). ceramic shaft bearing system (CST), to ensure increased output. Asynchronous, high-performance, silent motor (AMS). Durable, powerful, high-capacity pump capable of lifting large quantities of water. Capable of pumping contaminated water up to 8mm thick (max. 8mm thick dirt). The CasscadeMax® 15.000 pump is best suited for operating water scenes of the following heights and widths: 1.Height: 175 cm, corresponding width: 50 cm. 2.Height: 125 cm, corresponding width: 75 cm. 3.Height: 75 cm, corresponding width: 100 cm. 4.Height: 50 cm, corresponding width: 150 cm.

Pump characteristics

Maximum water volume (Q max) 15000 l/h

Maximum lifting height (H max) 5 m

Pressure connection diameter 1,1/2"

Power consumption 210 watts

Cable length 10 meters

Installation and operation

Water temperature 4-35 c°

Installation depth 0.2-1 Meter

Installation On a flat surface, below water level (dry running prohibited)

Maintenance and winterization

Easy maintenance thanks to its simple design. Depending on the type of use, it is sufficient to rinse the pre-filter housing and the pump with clean water. In case of winterisation, store in a bucket of water in a frost-free place after cleaning.

Kit contents

Pump, universal connector.

Other Features

Asynchronous motor epoxy resin embedded constant rotation pressure filter and high flow waterfall feeding pump with heat protection.

Quality reinforced robust magnet rotor and impeller insensitive to small particle size contaminants.

High wear (Long Working Life) ceramic shaft for continuous operation and low consumption.

Quick-locking sponge-free pre-filter system and adjustable levelling feet.