Ultrasonic pest-cat-dog alarm 150m2 Pest-stop
|HUF 16,027 * (nettó: HUF 12,620)|
A, Off mode
B, Motion detection mode (PIR)
C, 5sec alarm, 2min standby, 5sec alarm (repeating)
D, 5mp alarm, 5min standby, 5mp alarm (repeating)
Frequency: (use the frequency switch to select the animal to be alerted)
1, Rat, Small Cat, Birds, Rabbit (38 Khz-42KHz)
2, Cat, Small dog (23KHz-27KHz)
3, Large Dog, Rabbit, Cat, Fox, Deer (18KHz-20KHz)
Use the mode switch to turn the unit on. The mode can be switched by the switch on/off. If you want to use the device with the motion detector, switch the mode switch to "B". The motion detector has a 60° PIR angle of view and is triggered by moving hot spots within 15m of the unit. Movement of branches, bushes does not trigger the sensor. The blue LED indicator lights up during the alarm. For general alarms, e.g. cat "1" or "2", and switching to "B" (PIR) mode will give the best performance. The animal becomes aware that its movement is the focus of the unpleasant ultrasound and avoids the protected area.
Operate the device continuously to give the intruding animal time to develop its effect.
Pressing the "TEST" button will cause the device to emit an audible tone and the blue LED will light up, indicating that it is working and the batteries are charged. Low batteries are indicated by the blue LED on the front panel flashing every minute. The accessories allow you to mount the device on a side wall or on the ground and position it. The unit can also be operated from a mains adapter, which is not included. (The unit is slightly audible at lower frequencies up close.)
The device has no harmful effects on children, pregnant mothers, fish, reptiles. The device has a CE marking, which complies with European marketing requirements. The device does not use chemicals! Chemical free!
Accessories: brackets for fixing to the wall or ground, screws and pegs
|Basic sales unit:||db|
0 reviews, total: 0
0 reviews, total: 0