Manual tiller pushing hood 30 cm

Hand trowel cultivator tool family
Description of use


hoe soil loosener loosener filling plough
The hand tillage tool family is designed to facilitate the cultivation of small areas of land
of small fields.
Height adjustment of the pushing lever

This function allows the pushing arm to be adjusted to the height of the user
position of the tiller arm.


After loosening two screws on each side of the frame
the push bar can be fixed at the desired height.



Horizontal adjustment of the push rod

This function allows the push rod to be rotated in relation to the longitudinal axis.
This makes it easier to work alongside a wall or fence.


Loosening the two screws on the frame behind the wheel
the frame supporting the lever can be turned to the right or left.



Replacement of adapters:

Each adaptor is fitted with an L-shaped pin and a cotter pin
The adapters are attached to the chassis by means of an L-shaped adaptor with a threaded hole and a hinge. After removing the eagle pin, the pin can be removed,

The adapter to be replaced can then be simply pulled off the frame.

Maintenance
Sharpen the edges of the hoe member from time to time! The tool is recommended to be cleaned from mud after use,
from dirt and soil and store it as such. It is advisable to dismantle the wheel periodically and to remove the axle
clean and oil the axle.