Cascademax 12000 12000l/h

Ideal for running streams and waterfalls. Cascademax pumps are characterised by very low energy consumption. The pump filter does not form foam during operation. Special features of UBBINK Cascademax® pumps: 'No sponge required' system (NSS) for low maintenance. NSS "NSS" (NSS "NSS"), which requires no need for a NSS "NSS" system. TPS (Thermal Protection System). Asynchronous, high-performance, silent motor (AMS). Durable, powerful high-performance pump capable of lifting large volumes of water. Capable of pumping contaminated water up to 8 mm thick (max. 8 mm dirt thickness). The CasscadeMax ® 12.000 pump is best suited to operate water features of the following heights and widths: 1.Height: 150 cm, corresponding width: 50 cm. 2.Height: 100 cm, corresponding width: 75 cm. 3.Height: 50 cm, corresponding width: 100 cm. 4.Height: 25 cm, corresponding width: 150 cm.

Pump features

Maximum water volume (Q max) 12000 l/h

Maximum lift height (H max) 4 m

Pressure connection diameter 1,1/2"

Power consumption 158 watts

Cable length 10 meters

Installation and operation

Water temperature 4-35 c°

Installation depth 0.2-1 Meter

Installation On a flat surface, below water level (Do not run dry)

Maintenance and winterization

Easy maintenance thanks to its simple design. Depending on the type of use, it is sufficient to rinse the pre-filter housing and the pump with clean water. In case of winterisation, store in a bucket of water in a frost-free place after cleaning.

Kit contents

Pump, universal connector.

Other Features

Asynchronous motor epoxy resin embedded constant rotation pressure filter and high flow waterfall feeding pump with heat protection.

Quality reinforced robust magnet rotor and impeller insensitive to small particle size contaminants.

High wear (Long Working Life) ceramic shaft for continuous operation and low consumption.

Quick-locking sponge-free pre-filter system and adjustable levelling feet.